Bricks Are More Interesting Than You Think

An expert bricklayer reveals the origin of bricks, and how bricks and bricklayers have developed over thousands of years.
By India Cooper

Bricks may seem dull and mundane, but they have a history and come in all shapes and on.

The first known bricks have been dated to about 7,500 BC and were made from sun dried mud in the Upper Tigris area of south eastern Turkey. Archeological evidence shows the first fired bricks were probably produced in the third millennium BC in the middle east. Mud bricks don't stand up to tough weather conditions, so the development of fired bricks meant permanent buildings could be constructed in areas with high rainfall or cold or very hot weather. Bricks have the added advantage of being good insulators and storing heat during the day and releasing it slowly when the sun goes down.

By 1200 BC brick making was widespread - there is ample archeological evidence of their use across Europe and Asia and the Romans helped spread bricks across the Roman Empire.

Much later in the 18th and 19th centuries the development of transport networks and vehicles made the manufacture of building materials more centralized and industrialized. Up until then bricks, being heavy in bulk, tended to be made close to where they were used for construction. This industrialization of the process made shape and size more standardized as well. This made construction quicker and simpler for bricklayers, rather than using stones of various shapes and sizes, requiring "jigsaw skills". Fast construction was vital during the industrial revolution, so the use of bricks became increasingly popular.

So what's in a brick? Bricks are most commonly made from clay. Raw clay is mixed with sand (to reduce shrinkage). The mixture is ground and mixed with water before being pressed into steel moulds, using a hydraulic press. The bricks are then fired to 1,000 centigrade, which locks in their strength. Modern brick-making involves rail kilns, where bricks are put through a kiln on a conveyor belt, slowly moving through to achieve continuous production.

Of course not all bricks are the same. For instance some a redder, others more yellow or pale. The colour is influenced by the mineral content of the clay used. So red bricks have a high iron content while pale bricks have a higher lime content. Also the hotter the temperature when firing the bricks, the darker they will be. Modern, concrete bricks tend to be grey.

So what do bricklayers like in a brick? First of all, bricklaying is a manual job so it's important that bricks can be picked up and handled easily in one hand, so that cement can be laid with a trowel with the other hand. This makes the job of bricklaying quicker. But there are other considerations, depending on the nature of the job. Brick colour, density, thermal qualities, fire resistance and size can all be relevant. Often large concrete blocks are used by bricklayers for internal, unseen work. As they are larger, not so many are required so with two bricklayers on the job a wall can go up quickly. Obviously with decorative or exposed brickwork the colour or even shape will be important to create the right effect.

Bricks began life as a step towards building stronger, more permanent buildings. But now bricklayers use them not only for buildings and walls but also for paving and pedestrian precincts - the modern equivalent of cobbles. Bricks are also used in industries requiring furnaces. The bricks used to build furnaces deal with regular, very high heats of 1,500 centigrade, for the production of glass and metals, so they need to be specially manufactured to be suitable for that sort of environment.

Bricks are everywhere but few people know their qualities, how they are made or where they originate from. They have been around for millennia, and so have the bricklayers who lay them. They are a strong, dependable building material that has changed very little for thousands of years and that will doubtless go on sheltering us for centuries to come.

Expert bricklayer India Cooper reveals the origin of bricks, and how bricks and bricklayers have developed over thousands of years. To find out more please visit

Article Source:

Commemorating three and a half centuries of the Great Hudson River Brick Industry.
By George V. Hutton

The Hudson River brick industry went down before an array of overwhelming forces, including large demographic changes, competition by new technologies, and by brickmakers in distant locations that had achieved access to the New York market, as well as new environmental standards. During its lifetime, nothing can gainsay that industry's indispensable contribution to the very existence of New York City, where the record of that accomplishment is everywhere to be seen. With the exception of IBM, there is nothing comparable to that industry in the Hudson Valley today in terms of size and consequence of its production.

Soon enough, virtually all vestiges of the physical presence of all that intensive manufacturing activity will have observably disappeared. The great majority of the substantial changes to the landscape, resulting from the excavation operations, will not be discernible due to overgrowth, a condition that is nearing completion at this writing. Development of brickmaking sites for other purposes will also obliterate all signs of past endeavors.

Yard Flue 2006 - DSBiz Photo
Shultz Flue, July, 2006
Perhaps one of the two graceful nineteenth-century brick boiler flues at East Kingston (the Shultz yard flue being a personal favorite), built to power the steam engines that drove the brick machines, will be treasured as the sole remaining industrial artifact of three and one half centuries of the existence of the great Hudson River brick industry.

George Hutton's book, The Great Hudson River Brick Industry is available at a special discount for visitors of

At the beginning of the twentieth century, brick manufacturing was the dominant industry on the Hudson River. One hundred thirty manufacturers employed seven to eight thousand workers. It was the largest brickmaking region in the world, supplying vast amounts of this most essential building material to the fastest-growing city in the world. Spanning three and a half centuries, this industry ceased to exist in the year 2002. Included here are accounts of technological innovations, manufacturing methods, periods of enormous production, and wrenching business crises that transformed the entire industry. Elements of this history include the arrival of immigrants from Ireland, Italy, Hungary and the American South, as well as labor relations.

Click Here For More Info

Hudson River Brickmaking | Brick History/How Bricks Were Made
Links | Contact Form | IBCA | BOOK SHOP
Visitors' Comments/Collections/Brix Pix | Our Collection | HOME